loading process

Pulse thrust loading process based on PVDF sensor

基于PVDF传感器的单脉冲激光推力加载过程研究

互联网摘选

Three-dimensional Consolidation Analysis of Sand Drain's Ground Under Combined Vacuum and Surcharge Preloading Considering Loading Process

考虑加载过程的真空联合堆载砂井地基三维固结分析

互联网摘选

The recovery and reuse of waste solvent from the loading process of metallocene catalyst were studied.

针对茂金属催化剂负载化过程中所产生的废溶剂开展了相关的回收工艺研究.

互联网摘选

Loading Process Analysis of the Outside Rolled Angle Consolidated Column

外包角钢加固柱受载全过程分析

互联网摘选

Control method of weight rearrangement during loading process of dead weight force standard machine

力标准机加载过程砝码倒换控制方法

互联网摘选

The mechanism model is built in the paper. In loading process, cargo tank pressure is kept in certain value by using high duty compressor.

建立了装卸货过程中液舱温度、压力的机理模型，装货过程中利用高负载压缩机对液舱压力进行控制。

互联网摘选

It is indicated that the main factors affecting tensile stress relaxation test at normal atmospheric temperature are the type and precision of tester, loading process of sample, test temperature and data disposal.

指出影响常温拉伸应力松弛试验的主要因素有试验机的类型和精度，试样的加荷过程，试验的温度及数据处理。

互联网摘选

This paper did a simulation research on the loading process of hydraulic dynamometry rotor.

对水力测功器转子的承载过程进行了仿真研究。

互联网摘选

With some CNC machines, even the workpiece loading process has been automated.

在有些数控机床上, 甚至工件装夹的过程都是自动化的.

互联网摘选

an analysis of optimal loading process of the large tanker

大型油船的合理装载过程

互联网摘选

Result shows that the J-integral of creak tip changes significantly with the thermal cyclic loading process.

结果表明，裂纹尖端J积分值随着热循环载荷进程有明显变化，在。

互联网摘选

The reinforced concrete beam with concrete damage and steel corrosion are selected to carry on ultimate bearing capacity test, the stress and deformation of the controling section in the loading process and ultimate bearing capacity are determined.

选择存在混凝土破损和钢筋锈蚀的钢筋混凝土梁进行极限承载力试验，测定加载过程中的控制截面的应力和变形，以及最终承载力。

互联网摘选

The characteristics of the hysteretic performance, the stress development of steel bar; steel shape, concrete in the loading process, the location and trend of crack development, the failure modes of component were analyzed.

并分析了构件的滞回性能特征，加载过程中钢筋、型钢和混凝土的应力变化，裂缝的开展位置和趋势以及构件的破坏形式。

互联网摘选

The loading process on the rock is approximately linear at first and later acceleratory.

描述了岩石在受载过程中初期近似呈线性，随后加速的过程；

互联网摘选

Also, the Q Apply program does not drop referential integrity constraints on nicknames during the loading process and then restore them.

同样，在执行装入操作期间，Q Apply程序也不删除别名上的参照完整性约束，并在这之后恢复它们。

互联网摘选